These Oleo-Mac chainsaw parts will work wonders. A new chain gives a cleaner, quicker cut, making the chainsaw safer to handle and easier to use. Replacing the chain regularly can even prolong the chainsaw's life, as the motor does not have to work as hard and there is less vibration when the chainsaw is being used.

We have an excellent selection of Oleo-Mac chainsaw chains to fit 30cm, 35cm, 40cm and 45cm bars. Note that there are varying numbers of drive links within each bar length; therefore, it is important to get not just the right chain length but also the right number of drive links when ordering your Oleo-Mac chainsaw spares.

The drive link is the part of the chain that fits into the guide bar and is at the bottom of the chain. If you fit a chain with the wrong number of links, the chainsaw may not operate as reliably as it should; if it is loose, the chain may be dislodged during use, which can be dangerous.

The best advice is therefore to check your model number in the product listing or in the guide below. As we are constantly updating and expanding our stock, check the product page if you do not see your Oleo-Mac chainsaw spares listed below, as the part may have been added recently.

Oleo-Mac chainsaw parts - chains for a 30cm bar

• Oleo-Mac BC044 chain to fit 30cm bar, equivalent to 12”, with 44 drive links.
• Oleo-Mac BC045 chain to fit 30cm bar, equivalent to 12”, with 45 drive links.
• Oleo-Mac CH045 chain to fit 30cm bar, equivalent to 12”, with 45 drive links.

Note that the BC045 and CH045 have near identical sizing but fit different models, so check your model number before ordering.

Oleo-Mac chainsaw chains - 35cm bar

• Oleo-Mac CH049 chain to fit 35cm bar, equivalent to 14”, with 49 drive links.
• Oleo-Mac CH050 chain to fit 35cm bar, equivalent to 14”, with 50 drive links.
• Oleo-Mac BC050 chain to fit 35cm bar, equivalent to 14”, with 50 drive links.
• Oleo-Mac CH052 chain to fit 35cm bar, equivalent to 14”, with 52 drive links.
• Oleo-Mac CH053 chain to fit 35cm bar, equivalent to 14”, with 53 drive links.

Again, BC050 and CH050 have near identical sizing but are designed for different models, so look up your model number before ordering.

Oleo-Mac chainsaw spares - 40cm bar

• Oleo-Mac CH056 chain to fit 40cm bar, equivalent to 16”, with 56 drive links.
• Oleo-Mac CH057 chain to fit 40cm bar, equivalent to 16”, with 57 drive links.
• Oleo-Mac CH064 chain to fit 40cm bar, equivalent to 16”, with 64 drive links.
• Oleo-Mac CH066 chain to fit 40cm bar, equivalent to 16”, with 66 drive links.

Oleo-Mac chainsaw spares - 45cm bar

• Oleo-Mac CH072 to fit 40cm bar, equivalent to 18”, with 72 drive links.